Welcome to the official website of Foshan Weilin Qinli Machinery Co., Ltd.!

Production and sales of dock levelers and unloading platforms
Manufacturers from Guangdong Province, China

Foshan Weilin Qinli Machinery Co., Ltd.

WeChat scan

Service Hotline:

Current position : Home > News Center > Common problems

Service Hotline


Contact person : Miss Zhou
Cell phone : +8613929964509
E-Mail : weilinqinli168@163.com
Address : No. 5, First Street, Niulanwei Road, Dafengtian, Wuzhuang, Luocun, Shishan Town, Nanhai District, Foshan City, Guangdong Province, China

How to safely operate the mobile lifting platform?

Release time:09-14Views:434

With the increase of market demand, as a kind of high-altitude operation machinery and equipment, mobile lifting platforms are more and more commonly used in people's lives and work. So, how to safely operate the mobile lifting platform?

1. Before work, carefully check the components of the mobile lifting platform, focusing on whether the screw connection is reliable, whether the hydraulic pipeline components are leaking, and whether the wire contacts are loose or damaged.

2. Before the lifting platform is raised and lowered, the four-corner outriggers should be properly supported. The four outriggers should be firmly supported on a solid ground, and the work surface should be adjusted to a horizontal state (visual inspection is sufficient). Turn on the power, the indicator light should be on. Then start the motor, the oil pump works, and lift it once or twice under no load, and then start working after checking that the various parts are operating normally. When the temperature is lower than 10℃, the oil pump should be operated for 3-5 minutes, and the operation can only be carried out after confirming that the oil pump is working normally.

3. After entering the platform, the operator should close the guardrail door, plug in the latch, and fasten the safety rope. The center of the load (where the person can stand) should be at the center of the work surface as much as possible.

4. Lifting and descending: Press the "lift" button to start the motor, the motor rotates, the hydraulic system works, the cylinder extends, and the platform rises; when it reaches the height required for work, press the motor "stop" button, and the platform stops lifting , You can work. If you don't press the "stop" button, the travel switch will work when the platform rises to the calibrated height, and the platform will stop at the calibrated height. After the work is finished, press the "down" button, and the solenoid valve will act. At this time, the oil return of the oil cylinder is connected, and the platform is lowered by its own weight.

5. It is strictly forbidden to overload during the use of the mobile lifting platform, and operators on the platform are not allowed to move during the lifting and lowering process.

6. When moving or towing the hydraulic platform, the support legs should be stowed and the platform should be lowered to the lowest position. It is strictly forbidden to move the platform when the operator is in a high position.

7. When the mobile lifting platform fails to work normally, the power supply should be cut off in time for maintenance. It is strictly forbidden to work on the equipment with diseases. Non-professionals should not disassemble hydraulic components and electrical components.

8. Do not use the aerial work platform when the ground is not stable; do not lift the platform when the platform is not stable, the outriggers are not adjusted, leveled, and the ground is not secure.

9. Do not adjust or retract the outriggers when there are people on the mobile lifting platform or when it is raised.

10. Do not move the machine when the platform is raised. If you need to move, please shrink the platform first and loosen your legs.

Compared with the traditional scaffolding operation, the mobile lifting platform is safer and more efficient. Therefore, we must clearly understand its safe operation to avoid accidents.

Share this:
Service Hotline

Service Hotline


to top